Sixer 16






























Sixer 16
![[A0010-SIXR-TAN] Side angle view of the Desert Tan Sixer 16](http://decked.com/cdn/shop/files/sixer-1-7-24.jpg?v=1721404276&width=1080)
Weatherproof
Feel that satisfying “schlunk!” when you close it. H2Zero gaskets ensure total weatherproofing, giving you peace of mind no matter where you take ‘em.
Dustproof
Darned near hermetically sealed against dust intrusion.
Bombproof
Impact resistant mineral reinforced polymer construction. Tough enough to drive a truck over.
Stackable
Tetris, not Jenga. Interlocking, modular, stackable, We call it Stable Stack. You’ll call it “hell yeah”.
One-Handed Operation
Designed to be easily opened with one hand tied behind your back (unless you only have one arm). You can even open them in the drawer. Just slam it closed and the latches engage, easy as that.
Portable
We obsess over ergonomics so we made these the most portable Cases on the market. Great handles that fit to your hand no matter the load.


Clutch Latch
Squeeze with one hand to open. Slam it closed and it locks. All while holding a hot dog in your other hand.
Super Tough Impact Resistance
Impact-resistant, mineral-reinforced polymer construction, built by the best in the biz at our molding facility in Ohio.
Weatherproof and Dustproof
Sealed with an H2Zero gasket that keeps out dust and water.
Stable When Stacked
No tip-overs. Interlocking lids and bases mean you can stack our cases and bins together with rock-solid stability.
Tech Specs
Dimensions and Capacities
Specs:
- Volume: 16 L.
- Weight: 7 lb.
- Payload: 50 lb.
Dimensions:
- A: 17.1 in.
- B: 10.7 in.
- C: 7.9 in.

Important Notes
Compatible With:
Not Compatible With:
CASE COMPARISON
Clutch Latch: Squeeze with one hand to open. Slam it closed and it locks.
Snap Lid: Snap the lid on, stack ‘em up, and fear not: Your bottle cap collection is safe and protected!
Cam Latch: Securely locked when you want it closed but easy to open.
H2Zero Gasket: Not just “sorta weatherproof.” This is the real deal lid seal.
Gore Vent®: Weatherproof and pressure balancing ventilation.
Stable Stack: Perfect case-to-case, lid-to-base integration. Rock solid stability.
In-drawer Compatible: Full access and operation even when nested in drawers.
$90.00
$150.00
$300.00
16L
32L
80L
Clutch Latch
Clutch Latch
Cam Latch
H2Zero Gasket
H2Zero Gasket
H2Zero Gasket
Stable Stack
Stable Stack
Stable Stack
In-drawer Compatible
In-drawer Compatible
In-drawer Compatible
(not compatible with midsize, short bed Drawer System)
FAQ
Have a Question?
You know how they say there’s no such thing as a dumb question? Well, they were wrong, but here are some common not-so-dumb ones. Still flummoxed? Contact our customer support.
contact usHow tough are the DECKED Cases and Bins?
The polymers in DECKED cases and bins are constructed with a high strength, high impact material designed to take a beating.
Once, we accidentally drove over a Sixer with a Tacoma. It survived, so we did it again for the camera. Basically, they're pretty damn tough.
Are DECKED Cases and Bins weatherproof?
Yes! Polymer construction won't ever rust and sheds water better than a duck's back.
Additionally, Honcho 80, Halfrack 32, and Sixer 16 protective Cases include H2Zero gaskets that ensure total weatherproofing between lid and case, giving you peace of mind no matter where you take ‘em.
How do DECKED Cases and Bins stack?
All DECKED Cases and Bins feature a modular design that allows them to be stacked. We call it Stable Stack. Base profiling interlocks cleanly with indentations on the lids, meaning that you can stack them together without any worry of them toppling. They will remain stacked together all the way up to a 42-degree tip-over angle.
Where are the DECKED Case and Bins made?
Unlike most plastic things you buy nowadays, our Cases and Bins are manufactured right here in the USA, courtesy of the great state of Ohio.
What are DECKED Cases and Bins made out of?
In short - highly durable, injection molded plastics.
And for you material-science nerds: DECKED uses two types of polypropylenes, which are versatile, lightweight thermoplastic polymers (No. 5 plastic) widely used in packaging, automotive parts, textiles, and medical devices due to its high heat resistance, chemical resistance, and durability.
Will DECKED Cases and Bins fit in my Drawer System?
If you have a NEW Drawer System, hell yes, our low-profile Cases and Bins will fit in the Drawer! This includes the Sixer 16, Halfrack 32, Payloader 32, and Honcho 80 (with one exception - see below).
Here's a rough guide to what'll fit, and where: Drawers on a full-size short (5'5" - 5'11" bed length) Drawer System can fit 2 Halfracks. Drawers on a full-size long (6'4" - 8' bed length) Drawer System can fit 3 Halfracks or 2 Halfracks + 1 Sixer. Drawers on a midsize short (4'6" - 5'2" bed length) Drawer System can fit 2 Halfracks and a Sixer. Drawers on a midsize long (6' - 6'2" bed length) Drawer System can fit 3 Halfracks.
There are two exceptions:
- The Honcho 80 is not in-drawer compatible with midsize short bed new Drawer Systems (4'6" - 5'2"). While it won’t fit in your drawer, it still offers the ultimate storage and protection, keeping your gear safe from the garage to the truck to the destination, and all the way back.
- DECKED cases are NOT compatible with Legacy Drawer Systems. The best way to determine if you have a Legacy Drawer System is if you have a bottle opener between your two drawers.
Will DECKED Cases and Bins fit in my Legacy DECKED Drawer System?
No, DECKED’s new Cases and Bins will not fit in Legacy Drawer Systems.
The best way to determine if you have a Legacy Drawer System is if you have a bottle opener between your two drawers. If so, cases and bins will not fit. Shop our and Legacy Accessories for compatible storage boxes and accessories.
Will DECKED Cases and Bins fit in my DECKED Tool Box?
Yes! If you have a NEW Tool Box, three Halfracks, Payloader 32s or Milwaukee Packout Organizers will fit on our Tool Box access rail. Dealers choice when it comes to the mix and match combo, but three of these cases is the magic number.
If you hang our cases or bins on the access rail you will have 6” of clearance under a Halfrack 32 and 4.5” of clearance under a Payloader 32.
This product is rated 4.8 of 5.0 stars.
It has received 164 reviews.


























![[A0020-HRAK-TAN] Side angle view of the Desert Tan Halfrack 32.](http://decked.com/cdn/shop/files/halfrack-1-7-24.jpg?v=1721405572&width=1080)
![[A0030-MMAN-TAN, A0031-MANF-TAN] Angle view of a closed Desert Tan Honcho](http://decked.com/cdn/shop/files/miunteman-tan-1-7-24.jpg?v=1721680941&width=1080)