Halfrack 32
Halfrack 32
📦 Ready to Ship!
Your order may not arrive by Dec. 25. But if it's a gift, you're in luck: Print this out as good substitute.
D-co Case System Deep Dive
Weatherproof
Feel that satisfying “schlunk!” when you close it. H2Zero gaskets ensure total weatherproofing, giving you peace of mind no matter where you take ‘em.
Dustproof
Darned near hermetically sealed against dust intrusion. Air pressure balanced with Gore Vents®.
Bombproof
Impact resistant mineral reinforced polymer construction. Tough enough to drive a truck over.
Stackable
Tetris, not Jenga. Interlocking, modular, stackable, We call it Stable Stack. You’ll call it “hell yeah”.
One-Handed Operation
Designed to be easily opened with one hand tied behind your back (unless you only have one arm). You can even open them in the drawer. Just slam it closed and the latches engage, easy as that.
Portable
We obsess over ergonomics so we made these the most portable Cases on the market. Great handles that fit to your hand no matter the load.
Clutch Latch
Squeeze with one hand to open. Slam it closed and it locks. All while holding a hot dog in your other hand.
Super Tough Impact Resistance
Impact-resistant, mineral-reinforced polymer construction, built by the best in the biz at our molding facility in Ohio.
Weatherproof and Dustproof
Sealed with an H2Zero gasket that keeps out dust and water.
Pressure Balancing Gore Vent®
Allows the inside to breathe and equalize without letting in liquid or dust particles.
Stable When Stacked
No tip-overs. Interlocking lids and bases mean you can stack D-co Cases together with rock-solid stability.
Tech Specs
Dimensions and Capacities
Specs:
- Volume: 32 L.
- Weight: 12 lb.
- Payload: 75 lb.
Dimensions:
- A: 21 in.
- B: 18 in.
- C: 7.9 in.
D-CO CASE COMPARISON
Clutch Latch: Squeeze with one hand to open. Slam it closed and it locks.
Snap Lid: Snap the lid on, stack ‘em up, and fear not: Your bottle cap collection is safe and protected!
Cam Latch: Securely locked when you want it closed but easy to open.
H2Zero Gasket: Not just “sorta weatherproof.” This is the real deal lid seal.
Gore Vent®: Weatherproof and pressure balancing ventilation.
Stable Stack: Perfect case-to-case, lid-to-base integration. Rock solid stability.
In-drawer Compatible: Full access and operation even when nested in drawers.
![[A0010-SIXR-TAN] Side angle view of tan Sixer 16](http://decked.com/cdn/shop/files/sixer-1-7-24.jpg?v=1721404276&width=1080)
![[A0040-DBIN-TAN] Tan D-co Bins stacked](http://decked.com/cdn/shop/files/D-co_Bin-1.jpg?v=1721406334&width=1080)
![[A0030-MMAN-TAN, A0031-MANF-TAN] Angle view of a closed tan Minuteman](http://decked.com/cdn/shop/files/miunteman-tan-1-7-24.jpg?v=1721680941&width=1080)
$90.00
$150.00
$125.00
$300.00
16L
32L
32L
80L
Clutch Latch
Clutch Latch
Snap Lid
Cam Latch
H2Zero Gasket
H2Zero Gasket
H2Zero Gasket
Stable Stack
Stable Stack
Stable Stack
Stable Stack
In-drawer Compatible
In-drawer Compatible
In-drawer Compatible
In-Drawer Compatible
(not compatible with midsize, short bed Drawer System)
FAQ
Have a Question?
You know how they say there’s no such thing as a dumb question? Well, they were wrong, but here are some common not-so-dumb ones. Still flummoxed? Contact our customer support.
contact usAre D-co Cases weatherproof?
Yes! Mineral Reinforced Polymer construction won't ever rust and sheds water better than a duck's back. H2Zero gaskets ensure total weatherproofing between lid and case, giving you peace of mind no matter where you take ‘em. Gore Vents® allow for pressure balancing without letting any of the wet stuff in.
How do D-co Cases stack?
All D-co Cases feature a modular design that allows stackability and compatibility when stacked. We call it Stable Stack. Base profiling interlocks cleanly with indentations on the Case lids, meaning that you can stack them together without any worry of them trying to wobble or topple. They will remain stacked together all the way up to a 42-degree tipover angle.
Will D-co Cases fit in my Drawer System?
Hell yes! That's one of the main reasons we designed them. Here's a rough guide to what'll fit, and where: Drawers on a full-size short Drawer System can fit 2 Halfracks. Drawers on a full-size long Drawer System can fit 3 Halfracks or 2 Halfracks + 1 Sixer. Drawers on a midsize short Drawer System can fit 2 Halfracks and a Sixer. Drawers on a midsize long Drawer System can fit 3 Halfracks.
There is one exception: the Minuteman is not in-drawer compatible with midsize short bed Drawer Systems (4'6" - 5'2"). While it won’t fit in your drawer, it still offers the ultimate storage and protection, keeping your gear safe from the garage to the truck to the destination, and all the way back.
Can D-co Cases nest together like those Russian dolls?
No. But you can safely stuff all your babushka's nesting dolls inside any of the cases and stack them as high as you want.
How tough are D-co Cases?
Real tough. The Mineral Reinforced Polymer the D-co Cases are constructed from may not actually be bulletproof (whole lot of range and caliber math to try and figure out there), but it is a high strength, high impact material designed to take a beating. How tough? Well, we accidentally drove over a Sixer with a Tacoma. Surprised that it survived, we did it again for the camera. They're pretty damn tough.
Where are D-co Cases made?
Unlike most plastic things you buy nowadays, D-co Cases are manufactured right here in the USA, courtesy of the great state of Ohio.
Will D-co Cases fit in my Legacy DECKED Drawer System?
No, D-co Cases will not fit in Legacy Drawer Systems. The best way to determine if you have a Legacy Drawer System is if you have a bottle opener between your two drawers. If so, D-Co Cases will not fit. Shop our Replacement Parts page for compatible storage boxes and accessories.
This product is rated 4.6 of 5.0 stars.
It has received 75 reviews.