Both full-size and midsize truck Drawer Systems can accommodate one full-bed-width, 1,000 lb payload, 75% extension CargoGlide of the correct size. Use the Vehicle Picker above to select the correct CargoGlide model.

Additionally, both full-size and midsize truck Drawer Systems can accommodate one half-bed-width CargoGlide mounted left, right, or center; or two half-bed-width CargoGlides side by side. The universal Bracket Kit must be used for any installation of a new CargoGlide onto a Drawer System.

If your Drawer System has D-ring tie-down mounting locations, you’re good to go.

CargoGlide is not compatible with Legacy Drawer Systems or new Drawer Systems for RamBox, service body, and cargo vans. If you already have a Drawer System, or are trying build your setup, the safe bet is to reach out to Customer Support.

Yes, but with one exception.

If you have a Drawer System for a midsize truck (that’s the one with the single drawer) and mount two half-bed-width CargoGlides on top, you will not have access to your stash bins due to the overall width of the two CargoGlides extending onto the Stash Bin lids.

When installing a compatible CargoGlide to our Drawer System, not a single one. The universal Bracket Kit bolts directly into existing tie-down mounting locations. If you’re looking to install directly to your truck bed, head over to our general CargoGlide page for more information on installation.

Note: If your CargoGlide isn't gliding like butter, loosen up the tailgate roller axle & nut. All you need is a 9/16" socket and 1/4" allen key and a quarter to half turn to free your CargoGlide to roll normally.

You bet. It’s called the No BS Warranty. Everything we make is built for hard use over the long haul, and we’ll be there for the journey. If you find an issue with your DECKED product, get in touch and we’ll handle it.

But then, if a tree falls on your truck, and no one’s around to hear it, is it covered by warranty? Probably not. But if Mother Nature, a collision, or some other mishap damages or destroys your DECKED gear, reach out anyway. We’ll do what we can within reason to get you rolling again.

No, CargoGlide cannot be mounted on cargo van Drawer Systems. To learn more about mounting CargoGlide directly to the cargo area in cargo vans see our CargoGlide page for compatibility.

We’re glad you asked. CargoGlide is built with 100% American labor. But also:

• Powder-coated, U.S. steel frame
• 3/4” marine type plywood deck
• Weatherproof and UV-resistant thermoplastic top sheet
• Extruded aluminum sidewalls
• Cast aluminum handle
• High-impact resistant polymer corner guards
• The beefiest, smoothest bearings and rollers out there