![[MN3, MN4, MN8, MN9] show-in-scroll](http://cdn.shopify.com/s/files/1/1387/9989/products/NISSAN_Frontier_5_1_WWXX0013_drawers_45_bundle_{width}x.jpg?v=1609857204)



S'ORGANISER
Débarrassez-vous des bacs et des poubelles aléatoires, sortez les câbles de démarrage de sous le siège arrière, arrêtez de pousser le ruban adhésif d'où il a roulé. Mettez fin au junk show avec un stockage segmenté.
CHARGE UTILE DE 2000 LB
CAPACITÉ DE 200 LBS PAR TIROIR
Votre camion n'est pas un sac à main pour homme. Il transporte des objets lourds comme du ciment, du contreplaqué, des VTT/motos, le nouveau congélateur de votre belle-mère. Vous pouvez empiler 2 000 lb de gros objets sur le dessus du pont tout en ayant accès à un espace de stockage roulant en douceur.
IMPERMÉABILISER
Tout ce qui tombe du ciel ne peut pas entrer dans vos tiroirs. Point final. Ils ne sont pas moulants Tupperwear; les particules en suspension dans l'air telles que la poussière ou le brouillard peuvent s'infiltrer.
SÉCURISE
TRANQUILLITÉ D'ESPRIT
Les deux tiroirs pleine longueur de DECKED gardent vos outils et votre équipement en sécurité, à l'abri des regards et de l'esprit. Verrouillez votre hayon et verrouillez vos tiroirs. Vos essentiels sont dans un Fort Knox mobile.
Features
Tout est dans les détails
-
POLYÉTHYLÈNE DE HAUTE DENSITÉ
Imperméable à la lumière UV et aux températures extrêmes. Né pour les environnements difficiles.
-
SOUS-CHÂSSIS EN ACIER
Squelette en acier galvanisé moulé dans le HDPE = rapport résistance/poids inégalé de 10:1.
-
AJUSTE COMME UN GANT
Forme sur mesure pour s'adapter à votre lit. Aucune perte d'espace utilisable.
-
STOCKAGE DES AMMO CANS
Compartiments supplémentaires près des passages de roues pour maximiser vos options de rangement.
-
POIGNÉE
Si facile à utiliser, même un ours pourrait le faire... avec des gants.
-
ROUES
Roues de tiroir à roulement scellé en uréthane. Rouleau. Comme. Le beurre.
-
RÈGLE ET OUVRE BOUTEILLE
Finitions fines pratiques parce que nous nous soucions. Traité avec des inhibiteurs de corrosion robustes.
-
PERÇAGE ZÉRO À MINIMAL
Les crochets en J se fixent aux attaches du lit. Facile à assembler, installer ou retirer.
-
MATÉRIAUX RECYCLÉS
Fabriqué à partir de HDPE 100% recyclé et d'acier américain recyclé.
DECKED truck bed storage drawers provide the ultimate access and organization for your tools and gear. Customize your truck and keep your gear organized, weatherproof and secure while maintaining full bed use. The DECKED tool box has a 2000lb payload and is 100% American Made. The best upgrade for your Nissan Frontier.
POLYÉTHYLÈNE DE HAUTE DENSITÉ
Imperméable à la lumière UV et aux températures extrêmes. Né pour les environnements difficiles.
SOUS-CHÂSSIS EN ACIER
Squelette en acier galvanisé moulé dans le HDPE = rapport résistance/poids inégalé de 10:1.
AJUSTE COMME UN GANT
Forme sur mesure pour s'adapter à votre lit. Aucune perte d'espace utilisable.
STOCKAGE DES AMMO CANS
Compartiments supplémentaires près des passages de roues pour maximiser vos options de rangement.
POIGNÉE
Si facile à utiliser, même un ours pourrait le faire... avec des gants.
ROUES
Roues de tiroir à roulement scellé en uréthane. Rouleau. Comme. Le beurre.
RÈGLE ET OUVRE BOUTEILLE
Finitions fines pratiques parce que nous nous soucions. Traité avec des inhibiteurs de corrosion robustes.
PERÇAGE ZÉRO À MINIMAL
Les crochets en J se fixent aux attaches du lit. Facile à assembler, installer ou retirer.
MATÉRIAUX RECYCLÉS
Fabriqué à partir de HDPE 100% recyclé et d'acier américain recyclé.
DECKED truck bed storage drawers provide the ultimate access and organization for your tools and gear. Customize your truck and keep your gear organized, weatherproof and secure while maintaining full bed use. The DECKED tool box has a 2000lb payload and is 100% American Made. The best upgrade for your Nissan Frontier.
Choses que vous pourriez avoir besoin de savoir
SKU: MN3
This DECKED truck bed organizer fits a Nissan Frontier pickup truck with a bed length of 5' manufactured from 2005 to 2021. It takes a short midsize bed DECKED system.
All DECKED Drawer Systems come standard with the following accessories included at no extra charge: (1) D-Box Desert Tan, (1) Crossbox Desert Tan, (1) DRAWERGANIZER™, Set of (2) Wide Drawer Dividers (Narrow Drawer Dividers can be purchased separately). Additional accessories ship for free, so order up! Check out our full accessory line HERE.
NOTE: This vehicle requires drilling holes in the truck bed for installation. For more information, check out the instructions HERE.
NOTE: Drawers are full bed-length drawers, but do not fully extend. Max midsize short drawer extension: 36” for reasons related to physics.
LINERS: Works with spray-in bed liner, but NOT a drop-in plastic bed liner.
BEDRUG: Works with BedRug mat, but NOT with a BedRug full liner.
WARRANTY: We offer a limited lifetime warranty on all DECKED products. Warranty in detail HERE.
SHIPPING POLICY: Shipping of a DECKED system anywhere in the contiguous U.S. is FREE. Shipping takes 7-14 days. Shipping Policy HERE.
Please visit the FAQ page for more answers to those tough questions!
Pour tous vos ingénieurs
CAPACITÉS DE POIDS :
2000 lb de charge utile uniformément répartie
200 lb de charge utile par tiroir
DIMENSIONS DU SYSTÈME :
POIDS TOTAL : ~205 lbs
LONGUEUR : 56"
LARGEUR : 56"-64"
HAUTEUR : 12"
DIMS D'EXPÉDITION : 226 lb, 68"x 39 " x 23"
DIMENSIONS DU TIROIR ÉTROIT :
LONGUEUR (haut du tiroir) : 53"
LONGUEUR (bas du tiroir) : 47,3"
LARGEUR (haut du tiroir) : 11"
LARGEUR (bas du tiroir) : 9,75"
HAUTEUR : 8,5"
EXTENSION (chacun) : 36"
DIMENSIONS DU TIROIR LARGE :
LONGUEUR (haut du tiroir) : 53"
LONGUEUR (bas du tiroir) : 47,3"
LARGEUR (haut du tiroir) : 18"
LARGEUR (bas du tiroir) : 16,75"
HAUTEUR : 8,5"
EXTENSION (chacun) : 36"
Spécifications techniques plus détaillées ICI.
Construit à partir de HDPE 100% recyclé (polyéthylène haute densité) moulé dans à un sous-châssis en acier galvanisé recyclé.
Choses que vous pourriez avoir besoin de savoir
SKU: MN4
This DECKED truck bed organizer fits a Nissan Frontier pickup truck with a bed length of 6'1" manufactured from 2005 to 2021. It takes a long midsize bed DECKED system.
All DECKED Drawer Systems come standard with the following accessories included at no extra charge: (1) D-Box Desert Tan, (1) Crossbox Desert Tan, (1) DRAWERGANIZER™, Set of (2) Wide Drawer Dividers (Narrow Drawer Dividers can be purchased separately). Additional accessories ship for free, so order up! Check out our full accessory line HERE.
NOTE: This vehicle requires drilling holes in the truck bed for installation. For more information, check out the instructions HERE.
NOTE: Because the long midsize DECKED system is 68", there will be about 4.86" of empty space between the tailgate end of the DECKED system and the tailgate. DECKED drawers require 4" to be opened, but the first 5 1/2" of the drawer are taken up by the handle cavity and drawer taper. So, it is nearly impossible to remove anything from the drawers with the tailgate closed.
NOTE: Drawers are full bed-length drawers, but do not fully extend. Max midsize long drawer extension: 42” for reasons related to physics.
LINERS: Works with spray-in bed liner, but NOT a drop-in plastic bed liner.
BEDRUG: Works with BedRug mat, but NOT with a BedRug full liner.
WARRANTY: We offer a limited lifetime warranty on all DECKED products. Warranty in detail HERE.
SHIPPING POLICY: Shipping of a DECKED system anywhere in the contiguous U.S. is FREE. Shipping takes 7-14 days. Shipping Policy HERE.
Please visit the FAQ page for more answers to those tough questions!
Pour tous vos ingénieurs
CAPACITÉS DE POIDS :
Charge utile de 2 000 lb uniformément répartie
Charge utile de 200 lb par tiroir
DIMENSIONS DU SYSTÈME :
POIDS TOTAL : ~230 lbs
LONGUEUR : 68"
LARGEUR : 56"-64"
HAUTEUR : 12"
DIMS D'EXPÉDITION : 264 lbs, 78" x 39 " x 23"
DIMENSIONS DU TIROIR ÉTROIT :
LONGUEUR (haut du tiroir) : 64,7"
LONGUEUR (bas du tiroir) : 59"
LARGEUR (haut du tiroir) : 11"
LARGEUR (bas du tiroir) : 9,75"
HAUTEUR : 8,5"
EXTENSION (chacun) : 42"
DIMENSIONS DU TIROIR LARGE :
LONGUEUR (haut du tiroir) : 64,7"
LONGUEUR (bas du tiroir) : 59"
LARGEUR (haut du tiroir) : 18"
LARGEUR (bas du tiroir) : 16,75"
HAUTEUR : 8,5"
EXTENSION (chacun) : 42"
Spécifications techniques plus détaillées ICI.
Construit à partir de HDPE (polyéthylène haute densité) 100 % recyclé dans le moule d à un faux-châssis en acier galvanisé recyclé.
Choses que vous pourriez avoir besoin de savoir
SKU: MN8
This DECKED truck bed organizer fits a Nissan Frontier pickup truck with a bed length of 5' manufactured from 2022 to current. It takes a short midsize bed DECKED system.
All DECKED Drawer Systems come standard with the following accessories included at no extra charge: (1) D-Box Desert Tan, (1) Crossbox Desert Tan, (1) DRAWERGANIZER™, Set of (2) Wide Drawer Dividers (Narrow Drawer Dividers can be purchased separately). Additional accessories ship for free, so order up! Check out our full accessory line HERE.
NOTE: This vehicle requires drilling holes in the truck bed for installation. A pigtail extension may be required to access the in-bed power outlet. For more information, check out the instructions HERE.
NOTE: Drawers are full bed-length drawers, but do not fully extend. Max midsize short drawer extension: 36” for reasons related to physics.
LINERS: Works with spray-in bed liner, but NOT a drop-in plastic bed liner.
BEDRUG: Works with BedRug mat, but NOT with a BedRug full liner.
WARRANTY: We offer a limited lifetime warranty on all DECKED products. Warranty in detail HERE.
SHIPPING POLICY: Shipping of a DECKED system anywhere in the contiguous U.S. is FREE. Shipping takes 7-14 days. Shipping Policy HERE.
Please visit the FAQ page for more answers to those tough questions!
Pour tous vos ingénieurs
WEIGHT CAPACITIES:
2000 lb payload evenly distributed
200 lb payload per drawer
SYSTEM DIMENSIONS:
TOTAL WEIGHT: ~205 lbs
LENGTH: 56"
WIDTH: 56"-64"
HEIGHT: 12"
SHIPPING DIMS: 226 lbs, 68"x 39" x 23"
NARROW DRAWER DIMENSIONS:
LENGTH (top of drawer): 53”
LENGTH (bottom of drawer): 47.3”
WIDTH (top of drawer): 11”
WIDTH (bottom of drawer): 9.75”
HEIGHT: 8.5”
EXTENSION (each): 36"
WIDE DRAWER DIMENSIONS:
LENGTH (top of drawer): 53”
LENGTH (bottom of drawer): 47.3”
WIDTH (top of drawer): 18”
WIDTH (bottom of drawer): 16.75”
HEIGHT: 8.5”
EXTENSION (each): 36"
More detailed technical specs HERE.
Built from 100% recycled HDPE (High Density Polyethylene) in-molded to a galvanized recycled steel subframe.
Choses que vous pourriez avoir besoin de savoir
SKU: MN9
This DECKED truck bed organizer fits a Nissan Frontier pickup truck with a bed length of 6'1" manufactured from 2022 to current. It takes a long midsize bed DECKED system.
All DECKED Drawer Systems come standard with the following accessories included at no extra charge: (1) D-Box Desert Tan, (1) Crossbox Desert Tan, (1) DRAWERGANIZER™, Set of (2) Wide Drawer Dividers (Narrow Drawer Dividers can be purchased separately). Additional accessories ship for free, so order up! Check out our full accessory line HERE.
NOTE: This vehicle requires drilling holes in the truck bed for installation. A pigtail extension may be required to access the in-bed power outlet. For more information, check out the instructions HERE.
NOTE: Because the long midsize DECKED system is 68", there will be about 4.86" of empty space between the tailgate end of the DECKED system and the tailgate. DECKED drawers require 4" to be opened, but the first 5 1/2" of the drawer are taken up by the handle cavity and drawer taper. So, it is nearly impossible to remove anything from the drawers with the tailgate closed.
NOTE: Drawers are full bed-length drawers, but do not fully extend. Max midsize long drawer extension: 42” for reasons related to physics.
LINERS: Works with spray-in bed liner, but NOT a drop-in plastic bed liner.
BEDRUG: Works with BedRug mat, but NOT with a BedRug full liner.
WARRANTY: We offer a limited lifetime warranty on all DECKED products. Warranty in detail HERE.
SHIPPING POLICY: Shipping of a DECKED system anywhere in the contiguous U.S. is FREE. Shipping takes 7-14 days. Shipping Policy HERE.
Please visit the FAQ page for more answers to those tough questions!
Pour tous vos ingénieurs
WEIGHT CAPACITIES:
2000 lb payload evenly distributed
200 lb payload per drawer
SYSTEM DIMENSIONS:
TOTAL WEIGHT: ~230 lbs
LENGTH: 68"
WIDTH: 56"-64"
HEIGHT: 12"
SHIPPING DIMS: 264 lbs, 78" x 39" x 23"
NARROW DRAWER DIMENSIONS:
LENGTH (top of drawer): 64.7”
LENGTH (bottom of drawer): 59”
WIDTH (top of drawer): 11”
WIDTH (bottom of drawer): 9.75”
HEIGHT: 8.5”
EXTENSION (each): 42"
WIDE DRAWER DIMENSIONS:
LENGTH (top of drawer): 64.7”
LENGTH (bottom of drawer): 59”
WIDTH (top of drawer): 18”
WIDTH (bottom of drawer): 16.75”
HEIGHT: 8.5”
EXTENSION (each): 42"
More detailed technical specs HERE.
Built from 100% recycled HDPE (High Density Polyethylene) in-molded to a galvanized recycled steel subframe.